Old jeans Reused: How to make the bag (Part 1)

Lots of you wanted a how-to for the jeans bag, so this is it.  Part 1 is how to make the fabric.

Below is the finished bag. I bought nothing new to make it so it definitely counts as a stash bust.

Please leave a comment if you don’t understand any of the instructions and I’ll try to explain as soon as possible so that you can get started.

finished bag

Finished!Close up

To make it you will need:

The legs from a pair of jeans,

2 pieces of backing fabric eg. curtain lining – this acts as a support. It will be hidden by the bag lining.

2 pieces of coloured fabric (patterns are best but you can piece different fabrics to get a patterned effect),

fabric

a jeans or other heavy duty sewing machine needle, various threads for sewing the bag and lining and some bolder thread for the zigzags eg. quilting cotton.

2 pieces of firm fabric for the lining & an extra piece for the handle.

WARNING: DO NOT CUT YOUR FABRICS YET

The size of the fabric depends on the size of the legs of your jeans. I started with pieces approximately 16ins x 20ins. My handle was about 43 ins long and 3.5 ins wide.

Let’s start:

cutting the jeans1. Cut the legs off your jeans and cut away the side seams which are NOT topstitched.

fabric

Jeans fabric with side seams cut away. Note top stitched seam in the centre.

2. Cut the jeans fabric to bag size (see sizes above). Of course, your bag can be any size you like.

3. Cut your curtain lining and coloured fabric to the same size as the jeans fabric (see fabric requirements above).

FabricI used a piece of quilting cotton and some dressmaking leftovers from the 1990s which had to be pieced together to make the correct size.

4. Place a bag size piece of the curtain lining on the table, place the brightly coloured fabric face up on top of it, place jeans fabric on top (also face up).  You should have 3 layers.  Align the edges and tack together around the edges. This is called a sandwich!

SandwichShows all the layers of the sandwich.

The jeans fabric will not lay completely flat (because of the centre seam) but smooth it out as much as possible.

5. Using bold thread – I used leftover machine quiltiing cotton – make a line of zigzags near to the centre seam.  Try out the size of the zigzag first: mine was stitch width 4, length 2. Make another line of zigzags on the other side of the centre seam.

Zigzags6. Working from the centre outwards, make rows of zigzag stitches about half an inch apart. You don’t need to be especially accurate. You can see that my lines of zigzags wobble!

zigzagsRepeat until the sandwich is covered by rows of zigzags.

ZigzagsI needed to tidy up my sandwich afterwards as I had left the underneath showing to make this easier to follow.

7. Take out the tacking stitches.

8. Cut the jeans fabric between the rows of zigzags, making sure that you do not cut into the fabric underneath.

Cutting9. Cut back one side of the beween the rows gap almost to the stitching.  This shows more of the underneath fabric than if both edges were frayed.

Cutting between the rows10. Now the messy bit!  Fray the edge of the jeans fabric.

FrayingFrayingRepeat for the other sandwich.

Frayed!You’ve made the fabric!

I will show how I made the bag in the next post.

Happy Weekend! xxx

10 thoughts on “Old jeans Reused: How to make the bag (Part 1)

  1. Old Jeans Reused – How to Make the Bag (Part 2) – Rosyragpatch's Blog

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s